PCB Surface Finishes

PCB Surface Finishes – Implication on the SMT Process Yield.

Indium Corporation - Liyakathali.K

Excellent overview of surface finishes, includes Pros and Cons.

Design for Manufacturability (DFM) Tips

The suggestions in the link below are very conservative, not realistic for high density designs with fine pitch parts.  However good advice for simple low cost designs.

http://www.circuitservices.com/baretips.htm

'via Blog this'

Conductive Fill or Non-Conductive Fill ?

“Which is the Best Choice for My Design?”

"90% or more products today specify non-conductive epoxy"

'via Blog this'

How to Avoid Common Signal Integrity Issues in Your Designs

How to Avoid Common Signal Integrity Issues in Your Designs: - Barry Olney

'via Blog this'

Fastpro - Metal Stamping

Etching, Laser cutting, Stampings, Sheet Metal, Machining and Welding

Lead time and costs are controlled because Faspro has photo etching, Laser cutting, heat treating, plating and forming in-house.

Faspro specializes in board shields, contacts, metal antennas and other thin gauge formed metal parts. 

Faspro checks for 100% shield coplanarity.

*Standard lead times are 5-12 business days but can be expedited in 2 days if needed.

*1 part to thousands of parts

*Only 3D models needed

*ITAR Registered

www.fasprotech.com

Voltera - Circuit Printer

Voltera - Circuit Printer:

'via Blog this'

SMT Cable Clips | Harwin

Browse Products | Harwin:

click image to view

'via Blog this'